The M profile is used for metal press fittings from Geberit Mapress, VSH XPress and Bonfix, among others. Material: copper, stainless steel and carbon steel. M looks like V but the shape differs: you do not press an M fitting with a V jaw.
Which fittings do you press with M?
These are the fittings pressed with the M profile, according to our profile checker. If "also pressable with" lists another profile, the fitting is approved for several profiles.
Brand
System
Also pressable with
Bonfix
Pressfitting
·
Geberit
Mapress
·
VSH
XPress
·
Sizes and material
Sizes in our setM 12 · 15 · 18 · 22 · 28
MaterialCopper, stainless steel and carbon steel
Which set do you need for M?
The M profile is in all three sets: Standard (32 kN), Compact (19 kN) and Standard Mini (15 kN). Which one you need depends on your press tool, not on the fitting. Each set has 1 press jaw and 19 inserts (TH, V, U and M), from €345, free shipping in the EU. The UP profile is an optional add-on (+€50).
Pick the brand and system of your fitting and you see right away which profile you need.
Frequently asked questions
Look at the fitting or the packaging: the profile is usually marked (for example "M"). If in doubt, pick brand and system in our profile checker or send a photo of the fitting to info@stahlpresse.com.
No, M and V are not interchangeable. Exception: some fittings are approved for several profiles, such as Sanha NiroSan (SA, V or M up to 54 mm). Our set includes both M and V.
Only if the manufacturer has approved the fitting for it. Some fittings may be pressed with several profiles; those are listed in the table above under "also pressable with". Otherwise always use the manufacturer's profile.
The set includes the M sizes 12 · 15 · 18 · 22 · 28.
