The UP profile (also called U-Plus) belongs to Uponor S-Press Plus, the fitting for MLC and Uni Pipe Plus pipe. UP looks like U but has a notch that fits the Uponor fitting exactly. With UP inserts you also press regular U fittings.
Which fittings do you press with UP?
These are the fittings pressed with the UP profile, according to our profile checker. If "also pressable with" lists another profile, the fitting is approved for several profiles.
Brand
System
Also pressable with
Multitubo
Multitubo
U
Uponor
S-Press Plus (for MLC and Uni Pipe Plus)
·
Wavin
Tigris K1 / K5
TH
Wavin
Tigris M1 / M5
U
Sizes and material
Sizes in our setUP 16 · 20 · 25 · 32
MaterialUponor multilayer pipe (MLC, Uni Pipe Plus)
Which set do you need for UP?
The UP profile is not in the set by default: you add the UP profile (4 extra inserts, UP16 to UP32, +€50). That works with all three sets: Standard (32 kN), Compact (19 kN) and Standard Mini (15 kN). From €345, free shipping in the EU.
Pick the brand and system of your fitting and you see right away which profile you need.
Frequently asked questions
Look at the fitting or the packaging: the profile is usually marked (for example "UP"). If in doubt, pick brand and system in our profile checker or send a photo of the fitting to info@stahlpresse.com.
Yes. The UP insert also presses regular U fittings, such as Wavin and VSH. A regular U insert is not suitable for Uponor S-Press Plus.
Only if the manufacturer has approved the fitting for it. Some fittings may be pressed with several profiles; those are listed in the table above under "also pressable with". Otherwise always use the manufacturer's profile.
With the UP profile you get UP16, UP20, UP25 and UP32, plus TH14.
